Author Index

A

  • Abdous, Razie Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]
  • Abedi, Mohammad Comparison of energy consumption and greenhouse gas emission footprint caused by agricultural products in greenhouses and open field in Iran [Volume 5, Issue 2, 2017, Pages 157-163]
  • Ab Karim Ghani, Wan Azlina Wan Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Ahmad, Desa Comparison of energy consumption and greenhouse gas emission footprint caused by agricultural products in greenhouses and open field in Iran [Volume 5, Issue 2, 2017, Pages 157-163]
  • Ahmadi Nadooshan, Afshin Numerical simulation of laminar convection heat transfer from an array of circular perforated fins [Volume 5, Issue 2, 2017, Pages 147-156]
  • Ahmadi Nadooshan, Afshin The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Ameri, Mohammad Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Amidpour, Majid Design and optimization of solar-assisted conveyer-belt dryer for biomass [Volume 5, Issue 2, 2017, Pages 85-94]
  • Asadi, Mehdi Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • Ayati, Moosa On the development of a sliding mode observer-based fault diagnosis scheme for a wind turbine benchmark model [Volume 5, Issue 1, 2017, Pages 13-26]
  • Azami, Sina Theoretical analysis of reservoir-based floating photovoltaic plant for 15-khordad dam in Delijan [Volume 5, Issue 2, 2017, Pages 211-218]

B

  • Babaei, Alireza An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • Bagheri, Sajad Distance protection closed-loop testing using RTDS [Volume 5, Issue 2, 2017, Pages 197-210]
  • Bagherzadeh, Mohammad Energy flow modeling of broiler production in Guilan province of Iran [Volume 5, Issue 4, 2017, Pages 411-418]
  • Bahadorinejad, Mehdi Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer [Volume 5, Issue 4, 2017, Pages 341-348]
  • Bahrampouri, Rasool Thermodynamic simulation and pinch analysis of KCS11 [Volume 5, Issue 2, 2017, Pages 131-145]
  • Baniassadi, Majid An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • Bayareh, Morteza Numerical simulation of laminar convection heat transfer from an array of circular perforated fins [Volume 5, Issue 2, 2017, Pages 147-156]
  • Bayareh, Morteza The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Bayareh, Morteza Numerical simulation of a solar chimney power plant in the southern region of Iran [Volume 5, Issue 4, 2017, Pages 431-437]
  • Bazyar, Amir Hossein Energy flow modeling of broiler production in Guilan province of Iran [Volume 5, Issue 4, 2017, Pages 411-418]
  • Behbahani-nia, Ali Thermodynamic simulation and pinch analysis of KCS11 [Volume 5, Issue 2, 2017, Pages 131-145]
  • Behbahaninia, Ali Economic optimization of solar systems in uncertain economic conditions using the Monte Carlo method [Volume 5, Issue 3, 2017, Pages 313-323]

D

  • Dehghanbanadaki, Ali Effects of supportive spaces and people on heating energy demand in cold climate in Iran [Volume 5, Issue 4, 2017, Pages 357-374]

E

  • Ebrahimi-nik, Mohammadali Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Eliasi, Hossein Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Emami, Saeed Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis [Volume 5, Issue 4, 2017, Pages 375-387]
  • Esmaieli, Alireza Selection of the optimum prime mover and the working fluid in a regenerative organic rankine cycle [Volume 5, Issue 4, 2017, Pages 325-339]

F

  • Fathinia, Farzad The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system [Volume 5, Issue 4, 2017, Pages 401-409]
  • Firouzi, Saeed Energy flow modeling of broiler production in Guilan province of Iran [Volume 5, Issue 4, 2017, Pages 411-418]

G

  • Ghaebi, Hadi Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]
  • Ghaebi, Hadi Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer [Volume 5, Issue 4, 2017, Pages 341-348]
  • Ghobadian, Barat The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Ghodusinejad, Mohammad Hasan Determining the optimal size of a ground source heat pump within an air-conditioning system with economic and emission considerations [Volume 5, Issue 3, 2017, Pages 219-226]

H

  • Haeri, Abdorrahman Identification and assessment of training needs for employees of wind farms [Volume 5, Issue 2, 2017, Pages 189-196]
  • Haeri, Abdorrahman Proposing a quantitative approach to measure the success of energy management systems in accordance with ISO 50001: 2011 using an analytical hierarchy process (AHP) [Volume 5, Issue 4, 2017, Pages 349-355]
  • Haghighi Khoshkhoo, Ramin Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Hairi Yazdi, Mohammad Reza On the development of a sliding mode observer-based fault diagnosis scheme for a wind turbine benchmark model [Volume 5, Issue 1, 2017, Pages 13-26]
  • Hajabdollahi, Hassan 4E analysis and multi-objective optimization of gas turbine CCHP plant with variable ambient temperature [Volume 5, Issue 3, 2017, Pages 285-298]
  • Hajabdollahi, Hassan Selection of the optimum prime mover and the working fluid in a regenerative organic rankine cycle [Volume 5, Issue 4, 2017, Pages 325-339]
  • Hajabdollahi, Zahra 4E analysis and multi-objective optimization of gas turbine CCHP plant with variable ambient temperature [Volume 5, Issue 3, 2017, Pages 285-298]
  • Haji Agha Alizade, Hossein The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Hanafizadeh, Pedram Exergy , economy and pressure drop analyses for optimal design of recuperator used in microturbine [Volume 5, Issue 2, 2017, Pages 95-113]
  • Hemmati, Siroos Optimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force [Volume 5, Issue 1, 2017, Pages 1-11]
  • Hossain, Md Emrad RETRACTED! Transient stability enhancement of DFIG based 10 MW wind farm by using of new inductive bridge type fault current limiter [Volume 5, Issue 4, 2017, Pages 389-399]

J

  • Javaheri Fard, Hamed Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Javidi Gharacheh, Mojtaba Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]

K

  • Kaboli, Mohammad Hadi Effects of supportive spaces and people on heating energy demand in cold climate in Iran [Volume 5, Issue 4, 2017, Pages 357-374]
  • Kasiri, Samaneh Economic optimization of solar systems in uncertain economic conditions using the Monte Carlo method [Volume 5, Issue 3, 2017, Pages 313-323]
  • Keshtkarbanaeemoghadam, Azin Effects of supportive spaces and people on heating energy demand in cold climate in Iran [Volume 5, Issue 4, 2017, Pages 357-374]
  • Ketabi, Abbas Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Khojastehpour, Mehdi Gasification of potato shoots: An experimental and theoretical investigation [Volume 5, Issue 3, 2017, Pages 275-284]
  • Kowsary, Farshad Optimization of turbine blade cooling with the aim of overall turbine performance enhancement [Volume 5, Issue 1, 2017, Pages 71-83]

M

  • Maghsoudi, Peyman Exergy , economy and pressure drop analyses for optimal design of recuperator used in microturbine [Volume 5, Issue 2, 2017, Pages 95-113]
  • Makki, Mehrdad Optimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force [Volume 5, Issue 1, 2017, Pages 1-11]
  • Moghbelli, Hassan Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • Mohammadi, Shekoufeh Numerical simulation of laminar convection heat transfer from an array of circular perforated fins [Volume 5, Issue 2, 2017, Pages 147-156]
  • Momen, Mahyar Economic optimization of solar systems in uncertain economic conditions using the Monte Carlo method [Volume 5, Issue 3, 2017, Pages 313-323]
  • Moradi Cheshmehbeigi, Hassan The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system [Volume 5, Issue 4, 2017, Pages 401-409]
  • Moradi CheshmehBeigi, Hassan Electromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method [Volume 5, Issue 3, 2017, Pages 227-240]
  • Moravej, Zahra Distance protection closed-loop testing using RTDS [Volume 5, Issue 2, 2017, Pages 197-210]
  • Mortazavi Beni, Hamed The energy and exergy analysis of a novel cogeneration organic Rankine power and two-stage compression refrigeration cycle [Volume 5, Issue 3, 2017, Pages 299-312]
  • Mostoufi, Keivan Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]
  • Mousavi, Seyyed Morteza Optimization of turbine blade cooling with the aim of overall turbine performance enhancement [Volume 5, Issue 1, 2017, Pages 71-83]

N

  • Najafi, Hamid Reza Novel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant [Volume 5, Issue 1, 2017, Pages 43-58]
  • Nejat, Amir Optimization of turbine blade cooling with the aim of overall turbine performance enhancement [Volume 5, Issue 1, 2017, Pages 71-83]
  • Noorollahi, Younes Determining the optimal size of a ground source heat pump within an air-conditioning system with economic and emission considerations [Volume 5, Issue 3, 2017, Pages 219-226]

R

  • Rahnavard, Mostafa On the development of a sliding mode observer-based fault diagnosis scheme for a wind turbine benchmark model [Volume 5, Issue 1, 2017, Pages 13-26]
  • Rajamand, Sahbasadat Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Rezaei-Shouroki, Mostafa The location optimization of wind turbine sites with using the MCDM approach: A case study [Volume 5, Issue 2, 2017, Pages 165-187]
  • Rostamzadeh, Hadi Theoretical analysis of a novel combined cooling, heating, and power (CCHP) cycle [Volume 5, Issue 3, 2017, Pages 241-249]

S

  • Sabzi, Shahab Review, analysis and simulation of different structures for hybrid electrical energy storages [Volume 5, Issue 2, 2017, Pages 115-129]
  • Sadri, Somayyeh Multi objective optimization of the MED-TVC system with exergetic and heat transfer analysis [Volume 5, Issue 4, 2017, Pages 419-430]
  • Saidi, Mohammad Hassan Energy efficiency in a building complex through seasonal storage of thermal energy in a confined aquifer [Volume 5, Issue 4, 2017, Pages 341-348]
  • Samandari-Masouleh, Leila Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis [Volume 5, Issue 4, 2017, Pages 375-387]
  • Shadidi, Behdad The effect of a novel hybrid nano-catalyst in diesel-biodiesel fuel blends on the energy balance of a diesel engine [Volume 5, Issue 1, 2017, Pages 59-69]
  • Shahidehpour, Mohammad Accurate power sharing for parallel DGs in microgrid with various-type loads [Volume 5, Issue 1, 2017, Pages 27-41]
  • Shahnazari, Mohammadreza Equipment capacity optimization of an educational building’s CCHP system by genetic algorithm and sensitivity analysis [Volume 5, Issue 4, 2017, Pages 375-387]
  • Shakeri, Mohsen An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • Shamsabadi, Hosseinali Comparison of energy consumption and greenhouse gas emission footprint caused by agricultural products in greenhouses and open field in Iran [Volume 5, Issue 2, 2017, Pages 157-163]
  • Shirinbakhsh, Mehrdad Design and optimization of solar-assisted conveyer-belt dryer for biomass [Volume 5, Issue 2, 2017, Pages 85-94]

T

  • Tafazoli, Mehdi An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes [Volume 5, Issue 3, 2017, Pages 251-264]
  • Taheri-Rad, Alireza Comparison of energy consumption and greenhouse gas emission footprint caused by agricultural products in greenhouses and open field in Iran [Volume 5, Issue 2, 2017, Pages 157-163]
  • Torabi, Farschad Theoretical analysis of reservoir-based floating photovoltaic plant for 15-khordad dam in Delijan [Volume 5, Issue 2, 2017, Pages 211-218]

V

  • Vahdaty, Maziyar Theoretical analysis of reservoir-based floating photovoltaic plant for 15-khordad dam in Delijan [Volume 5, Issue 2, 2017, Pages 211-218]

Y

  • Yousefi, Hossein Determining the optimal size of a ground source heat pump within an air-conditioning system with economic and emission considerations [Volume 5, Issue 3, 2017, Pages 219-226]

Z

  • Zirak, Saadat Performance evaluation of trapezoidal teeth labyrinth seal [Volume 5, Issue 3, 2017, Pages 265-273]